Arbor Press accessories tools

So I bought a Framco 3-1/2 arbor press with a ratcheting handle. Other than pressing arbors I find most jobs press difficult and time consuming because I don't have the right fixture to hold some thing that needs pressing or the right punch to press with. I usually just cob something together which usually fights me thru the process anyway.

The most recent press job was removing 1/4" shaft brass gears from potentiometers held on with 3/32" roll pins. Drilling a new 3/32" hole thru a new 1/4" potentiometer shaft and pressing in a new 3/32" roll pin. For this job I used a small bench arbor press.

1st question is what do you like to have at your disposal for general press jobs. Pictures of common fixture or other accessory

2nd the punch I made quick was out of 12l14. I was planning on making a nice punch set but I wonder if 12l14 is softer metal than what I should be using. I ended up bending it a couple times and the end mushroomed and needed filing. What would be the best alloy/ in shop heat treatment options.

Thoughts and pictures much appreciated!

上一篇: "Truing" chuck jaws. Your opinions
下一篇: scripta machine tools
文章来自: cnc machining
引用通告: 查看所有引用 | 我要引用此文章
Tags: Arbor press accessories Tools
相关日志:
评论: 0 | 引用: 0 | 查看次数: -
发表评论
昵 称:
密 码: 游客发言不需要密码.
邮 箱: 邮件地址支持Gravatar头像,邮箱地址不会公开.
网 址: 输入网址便于回访.
内 容:
验证码:
选 项:
虽然发表评论不用注册,但是为了保护您的发言权,建议您注册帐号.
字数限制 1000 字 | UBB代码 开启 | [img]标签 关闭