Message
 Conatact Us
TEL:+086-0769-8201-7148
FAX:+086-0769-8201-7780
E-mail:ken13608@gmail.com

MSN:ken52103@hotmail.com































Home>> Message
The processing technology of computer gongs experience
source:www.chinacncmachining.net |publisher:chengchuang | date:2014/12/2 7:35:36  (Large Middle Small )

 1 white steel knife speed not too fast.

2 copper industry rough less white steel knife, multi useknife or alloy knife.

The 3 workpiece is too high, should the different length of the knife for slicing thick.

4 guarantee allowance consistent to knife, after the rough opening with machetes, knives application to remove the residual material.

5 plane application flat bottomed cutter processing,processing and use less knife, to reduce the processing time.

6 copper angle, first check on the corner of R size, todetermine how much the knife.

7 meter calibration plane quadrilateral angle to gongs.

8 where the gradient is an integer, application of knife angleprocessing, such as pipe position.

9 make every process, before a process to clear the remaining cushion after processing, in order to avoid airknife or processing excessive and knife.

10 try to walk the knife road simple, such as shape, trench,single, less walk around the contour.

11 to go WCUT, FINISH can go, do not go ROUGH.

12 shape knife, the first light crude, to the place, the workpiece is too high, the first light side, and then light at the end.

13 set a reasonable tolerance, to balance the accuracy and computing processing time. Rough, margin of tolerance is set to 1/5, knife, the tolerance is set to 0.01.

14 do a bit more processes, reduce air knife time. A bit ofthinking, to reduce the error opportunity. Do a little moreauxiliary line and auxiliary surface, better processing condition.

15 establish a sense of responsibility, careful examination ofeach parameter, avoid rework.

16 diligent in learning, good at thinking, progress.

?style type="text/css">
line: CNC Machining | diamond saw blades | agie charmilles edm | meter seal | plastic seal | vibrating screen | Refractory Bricks | china wire mesh | wire mesh type | EDA bearings | china mechanical seals | slip ring | 6061 aluminum plate | concrete machinery manufacturer | concretemachinerypro.com | www.bst-pyrolysis.com | meltpump.net | Global Trade Info |
百度友情链接? 新濠天地(www.dzxm.net/xintiandi/) 时时彩开?/a>(www.eastpearl.net/shishicaikaihu/) 贝博娱乐?/a>(www.eqtdcbzx.com/beiboyulecheng/) 网上娱乐?/a>(www.e-topbi.com/wangshangyulecheng/) 博狗扑克(www.fjsei.com/bogoupuke/) 博狗(www.flywxt.com.cn/bogou/) 澳门娱乐?/a>(www.gdbzh.com/aomenyulecheng/) 赔率(www.glzysc.com/peilv/) 吉祥?/a>(www.gmdmw.com/jixiangfang/) 皇冠赌场(www.gmsgfwz.com/huangguanduchang/) 赌博技?/a>(www.zrgjok2008.com/dubojiqiao/)